Lees Rigid Plastic Tubing is a clear rigid PVC tubing with thin walls. All rigid tubing is 36 inchs long and can be used as replacement uplift tubes or to fabricate custom set-ups for aquariums and pools.
Measured as Outside Diameter OD Tubing
Thinwall rigid tubing is made of clear PVC
All sizes are 36" long
Thinwall is approximately 1/32" thick
With Tetra Pond Non-Kink Pond Tubing you can connect pumps, bio-filters, UV clarifiers, waterfalls, and other water features. Tetra Pond Tubing is flexible and kink-resistant. Tetra Pond Tubing is also UV resistant, easy to hide, pre-cut rolls make it extra convenient. Compatible with all Tetra Pond equipment.Tetra Non-Kink Corrugated Black Pond Tubing is measured by the Inner Diameter - "I.D. Tubing"
Supreme's adjustable diverter valve is a 3-way valve designed to regulate water delivery from the pump source to waterfalls, Supreme Aquabelle, other fountains, UV and other filter systems, and statuary. Includes 1/2 inch NPT male with one 1/2 inch female NPT coupling, adjustable flow to each outlet, and off-on controls. Can be used with most popular pond pumps.
1/2" NPT Male with one 1/2" NPT Female Coupling
3-way pond diverter valve
Sturdy design
With Tetra Pond Black Tubing you can connect pumps, bio-filters, UV clarifiers, waterfalls, and other water features. Tetra Pond Tubing is flexible and easy to hide. The pre-cut rolls make it extra convenient for easy installation.
NOTE: Can be used with Pondmaster Pond Air Pumps!
Resistant to ultra-violet rays & Blends easily with pond liners
Features slip-fit for standard barbed fittings commonly used in pond applications, Barbed fittings require clamps
Soft, thick-wall hose
Beckett's Diverter Valve with Extension tube will divert water to different features and controls water flow. 1440 Diverter Valve: 7050910 - Uses 5/8" I.D. tubing- Diverts water to different water feature- Controls water flow- For use with Versa Gold and Dual Purpose series pumps
TetraPond Green Free UVC Adapter Kit is used to help ensure your UVC fits your pump. This UVC Barbed swivel adapter does not fit the older UV clarifiers before 2011 and does not fit any of the pressurized filters.
Only fits models 19523 (5 Watt); 19520 (9 Watt); 19521 (18 Watt); & 19522 (36 Watt)
Includes 2 barbes swivel adapters, 2 collar rings and 2 o-rings
This UVC adapter kit fits .75", 1" and 1.25" ID tubing
Lees Clear Tubing comes in a variety of sizes and can be used for Pond Tubing or Aquarium Tubing. Measurements are for ID Tubing - (inside diameter). Packaged in pre-printed dispenser boxes for easy storage or dispersal for stores.
NOTE: Can be used with Pondmaster Pond Air Pumps!
Resistant to ultra-violet rays
Features slip-fit for standard barbed fittings commonly used in pond applications, Barbed fittings require clamps
Soft, thick-wall hose
Inside diameter is slightly undersized for tight fit - (You may heat the end of the tube in warm water to slide onto tight fittings!) Size and flow arrows printed on all tubing & Marked every foot. Clamps Required on Tubing greater than 1" diameter!
Lees Black Tubing comes in a variety of sizes and can be used for Pond Tubing or Aquarium Tubing. Measurements are for ID Tubing - inside diameter. Packaged in pre-printed dispenser boxes for easy storage or dispersal for stores.NOTE: Can be used with Pondmaster Pond Air Pumps!
Resistant to ultra-violet rays & Blends easily with pond liners
Features slip-fit for standard barbed fittings commonly used in pond applications, Barbed fittings require clamps
Soft, thick-wall hose
Inside diameter is slightly undersized for tight fit - (You may heat the end of the tube in warm water to slide onto tight fittings!) Size and flow arrows printed on all tubing & Marked every foot. Clamps Required on Tubing greater than 1" diameter!
Tetra Pond Bottom Drain is for use with Pond liners. Allows debris to be removed from the bottom of the pond. Connect to pump via 3" PVC, ABS pipe or 3" swimming pool flex hose (not included).
Use this Pond Bottom Drian with 3" PVC or Tubing
Allows debris to be removed from the bootom of your pond or water garden by connecting to a pump
Pondmaster 200 Hose Connector Outlet is 1/2" Female NPT to 1/2 Barb hose fitting for Mag Drive and Pro pumps. The 1/2" barb fitting is designed for 1/2" Non Kink Tubing used for fountains and aquariums.
1/2" Female NPT x 1/2" Barb
For Mag Drive and Pro pumps
Replacement hose connector outlet