Fluval Impeller Cover 304/404 - 305/405 (New Style)
Hagen Impeller Cover Fluval replacement par. Impeller Cover Replacement part for the Fluval 304-404 and 305-405 Filters made after July 2001.NOTE: Please make sure your impeller has straight fan blades. (If your filter is older than July 2001 and/or has pink and curved fan blades then you will need to purchase the OLD MODEL: Part Number A-20155)
Fluval 304, 305, 404 and 405 Impeller Shaft - (New Style)
Hagen Impeller Shaft for Fluval 304, 305, 404 and 405 models manufactured BEFORE July 2001 require (Old Style) impeller Shaft!
For Fluval 304, 305, 404 and 405
With Rubber support For impellers
For impellers with straight fan blades only
Blister box
Over time wear and tare of the motor and motor parts can reduce pump performance, The Intake Strainer for Fluval 304-05 & 404-05 will help ensure reliable performance of your pump.
Hagen Fluval Tubing is Ribbed, Flexible, non-kink hosing usable for all applications with Fluval 305 / 405 and Fluval 304 / 404.This is only one hose at 9.5' long. The ends pictured are the two ends of the same tube.
Over time wear and tare of the motor and motor parts can reduce filter performance, The Lock Clamp for Fluval FX5 will help ensure reliable performance of your filter.
Over time wear and tear of the motor and motor parts can reduce pump performance, The Motor Seal Ring for Fluval 104-05 & 204-05 will help ensure reliable performance of your pump.
Fluval Ribbed Hose Adapter 2 per Pack by Hagen.
Available in 2 models: 30016: 105-205 and 30017: 305-405.
Diameter for for model # 30016: The ribbed end is 1 1/8" and the other end is 1/2". Diameter for model # 30017 The ribbed end is 1 1/4" and the other is 1 1/8".
Replacement Filter Canister RETROFIT for the old style Fluval 404 Filtration Units. The old canister is no longer made and this is the recommended solution.This kit contains replacement filter canister, two new-style lift lock clamps and motor cover.This is for the Old Style 404 and will not fit the New Style Filter
Hagen Impeller Cover Fluval replacement par. Impeller Cover Replacement part for the Fluval 304-404 Filters made prior to July 2001. NOTE: Please make sure your impeller has pink and curved fan blades. (If your filter is newer than July 2001 and/or has straight blades then you will need to purchase the NEW MODEL: Part Number A-20156)
Hagen Impeller Shaft for Fluval 304 and 404 models manufactured BEFORE July 2001 require (Old Style) impeller Shaft!
For Fluval 304 and 404
With Rubber support For impellers
For impellers with CURVED fan blades only
Blister box
1st Generation Impeller for Hagen Fluval 404 (Curved), Magnetic Impeller. For filters manufactured BEFORE July 2001.
With curved fan blades
Impeller shaft sold separately
Over time wear and tare of the motor and motor parts can reduce filter performance, The Motor Seal Ring for Fluval FX5 will help ensure reliable performance of your filter.